Conducted Under IEEE MTT-S Chapter SBC11474
ABV-Indian Institute of Information Technology and Management, Gwalior
Cyber Security & AI-Driven Defenses
CH11187

Advancements in Biomedical Antennas for Next-Generation Health Monitoring

A comprehensive technical webinar exploring cutting-edge 2.45 GHz Biomedical Antenna Design methodologies for enhanced health monitoring systems

28th March 2026
6:30 PM (GMT+5:30)
00 Days
00 Hours
00 Minutes
00 Seconds
Register Now

About This Technical Webinar

This specialized webinar will explore recent advancements in ultra-miniaturized implantable antennas, with emphasis on tissue-independent communication capabilities for injectable medical implants. Participants will gain insights into cutting-edge research published in IEEE journals and practical implementation strategies.

Academic Value

This webinar qualifies for 3 Professional Development Hours (PDHs) and offers a Certificate of Completion from Scholars Colab. Content is peer-reviewed and based on recent IEEE publications.

IEEE Research Focus

Critical analysis of recent IEEE publications on MIMO antenna technology in biomedical applications, including validation methodologies and experimental results.

Reconfigurable Architectures

Advanced techniques for designing reconfigurable MIMO antennas at 2.45 GHz for biomedical applications, addressing tissue variability challenges.

Simulation & Validation

Comprehensive simulation methodologies for injectable MIMO antennas using Ansys HFSS, following IEEE publication standards and validation protocols.

Featured Speaker

Dr. Sachin Kumar
Dr. Sachin Kumar
Deputy Dean (R&D) and Associate Professor, Galgotias College of Engineering and Technology
Stanford Top 2% Scientist 2020-2023 Fellow, IETE H-Index: 34 3700+ Citations

Dr. Kumar served as a Postdoctoral Research Fellow at Kyungpook National University, South Korea (2018-2021). With over 13 years of research experience, he has published 2 books, 14 book chapters, secured 10 patents, and authored 160 papers in SCI-indexed journals. His work has received over 3700 citations with an H-index of 34.

Dr. Kumar is a recognized peer reviewer for more than 60 scientific journals and serves on technical program committees for international conferences. His research focuses on MIMO antenna design for biomedical applications, wearable technology, and IoT systems in healthcare.

Education
Postdoctoral Research
Kyungpook National University, South Korea
2018-2021
Specialization in Biomedical MIMO reconfigurable antenna design
PhD in RF and Microwave Engineering
Netaji Subhas University of Technology, Delhi
2016
Research Focus Areas
Biomedical Antenna Design Implantable Devices MIMO Systems Wearable Technology Medical IoT
160+
SCI Publications
3700+
Citations
13+ Years
Research Experience
60+
Journal Reviewer Roles

Selected Publications

"Harlan, L., M. Susila, Sachin Kumar, Hyun Chul Choi, and Kang Wook Kim. "Reconfigurable Ultra-Miniaturized MIMO Antenna for Tissue-Independent Communication in Injectable Medical Implants." IEEE Access (2025).

Impact Factor: 3.9 | Citations: 24

"Sharma, Deepti, Rakesh N. Tiwari, Binod Kumar Kanaujia, Sachin Kumar, and Karumudi Rambabu. "Dual-band MIMO antenna data telemetry for dual-chamber leadless cardiac pacing on Internet of Things environment." IEEE Internet of Things Journal 11, no. 5 (2023): 9072-9085.

Impact Factor: 10.6 | Citations: 38

"Harlan, L., M. Susila, and Sachin Kumar. "Conformal multi-channel MIMO antenna for implantable leadless transcatheter pacing systems." AEU-International Journal of Electronics and Communications 190 (2025): 155621.

Impact Factor: 3.2 | Citations: 12

Previous Webinar Highlights

Watch our recent webinar recording

🏛️

Institutes

46+

🗺️

Countries

14+

⏱️

Time

1h 15m

Rating

4.8/5

Global Participants

46+
Institutes
14+
Countries

Swarnandhra College of Engineering and Technology

Center of Excellence Riset Sains Atmosfer – BRIN

Foundation for Women’s Health Promotion and Welfare Initiatives

IIIT Gwalior / ABV-IIITM Gwalior

Banaras Hindu University (BHU)

National Sun Yat-Sen University

Universiti Teknikal Malaysia Melaka

University of Technology

Gyanmanjari Innovative University

Pakistan Engineering Council (PEC)

Federal University of Technology, Akure

Indian Institute of Technology Kanpur

University of Petroleum & Energy Studies (UPES)

Sant Longowal Institute of Engineering and Technology (SLIET)

Indian Institute of Technology Delhi

Easwari Engineering College

Acharya Nagarjuna University

Children’s Health Defense

Dr. A.P.J. Abdul Kalam Technical University (AKTU)

Teacher Training School & Vocational Education, Bamako

Normal School of Technical & Vocational Education (ENETP)

ITS Engineering College, Greater Noida

University of the West Indies (UWI)

Rajalakshmi Institute of Technology

SRM Institute of Science and Technology

Lalit Narayan Mithila University (LNMU)

Gaziantep University

Mekdela Amba University

St. Mother Theresa Engineering College

Raghu Engineering College

MVP’s KBT College of Engineering

Symbiosis Institute of Technology, Pune

University of Karachi

NIT Silchar

COMSATS University Islamabad

Concordia University

Sanjivani College of Engineering, Kopargaon

University of Tunis El Manar

Saveetha Institute of Medical & Technical Sciences (SIMATS)

Manchester Metropolitan University

Institut Teknologi Sepuluh Nopember

SHMM Govt. Degree College, Anantnag

University of Bradford

DVVP College of Engineering, Ahilyanagar

University of Babylon

Mumbai University

OurTestimonial

Technical Curriculum

Introduction & Theoretical Framework

Comprehensive overview of injectable medical implants and their communication challenges, including tissue detuning effects, size constraints, and SAR compliance requirements. Examination of MIMO technology's role in enhancing data rates for implantable devices.

Learning Objectives:

  • Understand fundamental challenges in biomedical antenna design
  • Analyze tissue-dependent vs. tissue-independent communication approaches
  • Evaluate MIMO advantages for implantable devices
Research Paper Analysis

Critical examination of key innovations from recent IEEE publications:

  • Reconfigurable meandered antenna design (5 mm × 2 mm × 0.05 mm)
  • Diode-based switching mechanisms for fat/muscle adaptability
  • Orthogonal MIMO configuration achieving >15 dB isolation
  • Performance metrics: 60 MHz (fat) / 100 MHz (muscle) bandwidth, SAR compliance validation

Learning Objectives:

  • Critically analyze recent IEEE publications in biomedical antennas
  • Understand reconfiguration mechanisms for tissue adaptability
  • Evaluate performance metrics for implantable antennas
Simulation Methodology & Demonstration

Comprehensive simulation workflow using Ansys HFSS:

  • Geometry Setup (30 mins): Parametric modeling of meandered lines, shorting pins, and diode switching mechanisms. Material selection: Polyimide substrate (εr = 3.5, thickness 0.05 mm)
  • Reconfigurability Analysis (30 mins): Diode ON (Fat tissue) vs. OFF (Muscle tissue) states demonstrating frequency response shifts (2.42–2.48 GHz vs. 2.38–2.48 GHz)
  • MIMO Performance Validation (30 mins): Orthogonal element placement optimization, surface current distribution analysis, and mutual coupling validation (S21 < -15 dB)

Learning Objectives:

  • Implement parametric modeling of miniature antennas
  • Simulate reconfigurable antenna performance in biological tissues
  • Validate MIMO isolation characteristics through simulation

Frequently Asked Questions

What are the prerequisites for this webinar?

Participants should have a basic understanding of antenna theory and electromagnetic principles. Familiarity with microwave engineering concepts will be beneficial but not mandatory.

How does this webinar address academic research needs?

This webinar focuses on current research challenges in biomedical antenna design, presents recent IEEE publications, and demonstrates practical simulation methodologies - directly addressing needs of academic researchers and PhD candidates.

Will I receive supporting academic materials?

Registered participants will receive comprehensive reference materials including the presentation slides, key IEEE papers discussed, and simulation model templates for academic use.

Can this content be applied to academic research projects?

Absolutely. The methodologies and design approaches presented are directly applicable to research in biomedical engineering, antenna design, and medical IoT systems. The simulation techniques are particularly valuable for academic research.

Is this webinar suitable for PhD researchers?

Yes, the content is specifically designed to be valuable for PhD candidates and academic researchers. It addresses current research challenges and presents cutting-edge solutions published in top IEEE journals.

Will recordings be available after the webinar?

All registered participants will receive access to the webinar recording and presentation materials for 30 days after the event.

Academic Registration

Register using your institutional email to receive academic resources and research materials.

    Certificate of Participation

    All attendees will receive a certificate eligible to be considered for recognition by accreditation bodies like NBA and NAAC

    Supporting UN Sustainable Development Goals

    This webinar contributes to global sustainable development by advancing biomedical communication technologies, enabling continuous health monitoring, improving healthcare accessibility, and fostering innovation in medical infrastructure.

    Primary Focus

    SDG 9: Industry, Innovation and Infrastructure

    Key Target:
    Target 9.5: Enhance scientific research and upgrade technological capabilities in healthcare and medical communication systems.

    This webinar supports SDG 9 by showcasing innovations in biomedical antenna design, implantable and wearable communication systems, and wireless body area networks—strengthening healthcare infrastructure through advanced medical technologies.

    SDG 3: Good Health and Well-Being

    Key Target:
    Target 3.4: Promote health and well-being through early diagnosis, monitoring, and prevention using advanced medical technologies.

    Biomedical antennas play a vital role in enabling non-invasive, real-time health monitoring, implantable medical devices, and remote patient care—supporting improved diagnosis, disease management, and overall well-being.

    SDG 4: Quality Education

    Key Target:
    Target 4.4: Increase technical and scientific skills for innovation in healthcare and biomedical engineering.

    The webinar enhances technical education by equipping students, researchers, and professionals with knowledge of antenna design, electromagnetic safety, and biomedical communication—fostering skilled talent in healthcare technology.

    How This Webinar Contributes to Global Goals

    Next-Generation Health Monitoring

    Advanced biomedical antennas enable continuous, real-time monitoring of physiological parameters, improving early detection and long-term management of health conditions.

    Accessible & Remote Healthcare

    Wearable and implantable antenna systems support telemedicine and remote healthcare services, extending medical access to rural and underserved populations.

    Safe & Sustainable Medical Innovation

    The webinar emphasizes low-power, biocompatible, and safe antenna designs that align with electromagnetic exposure standards, ensuring responsible and sustainable medical technology development.