Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of 3d Printing In Medicine (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers 3d Printing In Medicine published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Radiology, Nuclear Medicine & Medical Imagingrank 33 of 223 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of 3d Printing In Medicine
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). 3d Printing In Medicine is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
Open access (listed in DOAJ); article processing charge listed at about US$2,190.
02Review time
Review time of 3d Printing In Medicine
Each paper took a different time. The green box holds the middle half of the papers and the dark line is the median; the whiskers reach the fastest 10% and the slowest 10%. Plan with the whole spread, not only the median.
Half of the research articles 3d Printing In Medicine published between Oct 2024 and Oct 2026 were accepted within 207 days of submission, and the middle half took between 157 and 320 days. This time includes peer review and any revision rounds. Papers that were rejected are not counted, because only published papers carry these dates.
In Radiology, Nuclear Medicine & Medical Imaging, 3d Printing In Medicine ranks 71 of 72 journals by review time (1 = fastest). See the fastest-review journals in Radiology, Nuclear Medicine & Medical Imaging →
03Fee waivers
APC waivers and discounts for 3d Printing In Medicine
We have not found a published waiver policy for this journal's publisher. Ask the editorial office before you submit, and compare publishers that do waive the APC in the APC waiver checker.
Waivers apply to fully open access journals. If 3d Printing In Medicine is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Who funds research published in 3d Printing In Medicine
Funders named most often
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to 3d Printing In Medicine? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
04Indexing
Indexing of 3d Printing In Medicine
| List | Status |
|---|---|
| Science Citation Index Expanded (SCIE) | Not listed |
| Social Sciences Citation Index (SSCI) | Not listed |
| Arts & Humanities Citation Index (AHCI) | Not listed |
| Emerging Sources Citation Index (ESCI) | Not listed |
| Scopus | Not listed |
| Journal Citation Reports 2024 | ✓ Listed |
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
Each link opens the official record for this journal, searched by its ISSN where we have one.
05How to submit
How to submit to 3d Printing In Medicine
- Read the guide for authors. It sets the article types, word limit, reference style and file format that 3d Printing In Medicine accepts. You find it on the official website of the journal, usually under "For authors" or "Submit".
- Format to the journal's style. Check whether it wants a Word file, a LaTeX file or a PDF for the first submission, and follow its reference style; many journals accept any clear format at first and ask for their style only after acceptance.
- Check the fit. Compare your title and abstract with the papers it has published; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Plan the fee. 3d Printing In Medicine is fully open access, with an article fee of about US$2,190 after acceptance. See whether your author team qualifies for a waiver with the free APC waiver checker.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
06What it publishes
What 3d Printing In Medicine publishes: real papers
07Published papers
Papers published in 3d Printing In Medicine
Papers from the publication records ScholarsColab tracks, with their year and citations. Author names are not shown.
- Use of 3D-printed polycaprolactone+ hyaluronic acid-based scaffold in orthopedic practice: Report of two cases20237 citations
08Reviewer comments
Reviewer comments and rejection reasons for 3d Printing In Medicine
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to 3d Printing In Medicine, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
09Similar journals
Journals similar to 3d Printing In Medicine
Journals that publish the closest work to the papers above, from the indexing lists:
- Frontiers in Bioengineering and BiotechnologySCIEScopusJCR 20248 similar papers
- PLoS ONESCIEScopusJCR 20244 similar papers
- Dental And Medical ProblemsJCR 20241 similar paper
- Annals of Clinical and Laboratory ScienceSCIEScopusJCR 20241 similar paper
- Journal of Biomolecular Structure and DynamicsSCIEScopusJCR 20241 similar paper
10Same subject
Radiology, Nuclear Medicine & Medical Imaging journals with a similar impact factor*
The journals next to 3d Printing In Medicine when the 213 journals of Radiology, Nuclear Medicine & Medical Imaging in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 29 | Dentomaxillofacial Radiology | 4.23 | SCIE | Subscription |
| 30 | EJNMMI Radiopharmacy and Chemistry | 4.10 | ESCI | Fully open access |
| 31 | Japanese Journal of Radiology | 3.91 | SCIE | Subscription |
| 32 | Journal of Imaging Informatics in Medicine | 3.88 | SCIE | Subscription |
| 34 | Frontiers in Nuclear Medicine | 3.82 | ESCI | Fully open access |
| 35 | BMC Medical Imaging | 3.80 | SCIE | Fully open access |
| 36 | European Journal of Radiology | 3.66 | SCIE | Subscription |
| 37 | Journal of Biomedical Optics | 3.61 | SCIE | Fully open access |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
11Journal Finder
Find the right journal for your paper
Is 3d Printing In Medicine right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,724 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
12Questions
Frequently asked questions
How long is the review time of 3d Printing In Medicine?
Based on 112 research articles 3d Printing In Medicine published from Oct 2024 to Oct 2026, the median time from submission to acceptance was 207 days, and half of them were accepted between 157 and 320 days. After acceptance, papers appeared online after a median of 15 days. Source: received and accepted dates deposited by the publisher in Crossref, retrieved October 2026. Individual papers can take longer, especially with major revisions.
What is the impact factor of 3d Printing In Medicine?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of 3d Printing In Medicine is 3.88: papers it published in the two previous years were cited 3.88 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of 3d Printing In Medicine?
The h-index of 3d Printing In Medicine is 42 (OpenAlex, October 2026): 42 of its papers have each been cited at least 42 times. Its i10-index is 164.
What is the APC of 3d Printing In Medicine?
OpenAlex lists an article processing charge (APC) of about US$2,190 for 3d Printing In Medicine, an open access journal (data from October 2026). APCs change and can differ by article type, country or discounts, so confirm the current charge on the journal’s website before submitting.
What is the quartile of 3d Printing In Medicine?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). 3d Printing In Medicine is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is 3d Printing In Medicine indexed in Scopus?
3d Printing In Medicine is not listed in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is 3d Printing In Medicine an SCIE journal?
3d Printing In Medicine is not listed in SCIE or the other Web of Science indexes, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is 3d Printing In Medicine in Journal Citation Reports (JCR)?
Yes. 3d Printing In Medicine is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
How many papers published in 3d Printing In Medicine does ScholarsColab track?
We track 1 paper published in 3d Printing In Medicine in 2023, cited 7 times in total, with a median of 7 citations per paper.
Who funds research published in 3d Printing In Medicine?
52% of 113 recent research articles in 3d Printing In Medicine name a funder in Crossref; the funders named most often are Universität Leipzig, Ministerstvo Zdravotnictví Ceské Republiky, Interdisciplinary Program of Shanghai Jiao Tong University.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- Review of Scientific Instruments
- Science of the Total Environment
- Journal of Biological Chemistry
- Journal of Allergy and Clinical Immunology
- Journal of Animal Science
- Tetrahedron Letters
- Inorganic Chemistry
- Annals of Oncology
- Physical Review C
- Biochemistry
- Journal of Dairy Science
- Biochemical and Biophysical Research Communications
- Macromolecules
- RSC Advances
Browse all journals: indexing, impact factor and reviewer comments →