Springer London provides LaTeX templates for many of its journals. Check this journal’s author guidelines, and we can convert your manuscript into its template.
LaTeX Template Conversion →Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of Cognition Technology & Work (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers Cognition Technology & Work published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Engineering, Industrialrank 32 of 75 journals
- Ergonomicsrank 13 of 25 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of Cognition Technology & Work
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Cognition Technology & Work is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
Article processing charge listed at about US$3,390.
02Review time
Review time of Cognition Technology & Work
Each paper took a different time. The green box holds the middle half of the papers and the dark line is the median; the whiskers reach the fastest 10% and the slowest 10%. Plan with the whole spread, not only the median.
Half of the research articles Cognition Technology & Work published between Nov 2024 and Oct 2026 were accepted within 156 days of submission, and the middle half took between 97 and 280 days. This time includes peer review and any revision rounds. Papers that were rejected are not counted, because only published papers carry these dates.
In Engineering, Industrial, Cognition Technology & Work ranks 5 of 19 journals by review time (1 = fastest). See the fastest-review journals in Engineering, Industrial →
03Fee waivers
APC waivers and discounts for Cognition Technology & Work
Cognition Technology & Work follows the waiver policy of its publisher, Springer Nature: 100% waiver for low-income countries and 50% for lower-middle income countries (World Bank list with a GDP limit), on request at submission. Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver.
Authors affiliated in 25 countries qualify for a full waiver. See the countries →
Waivers apply to fully open access journals. If Cognition Technology & Work is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Retractions and research integrity at Cognition Technology & Work
Most common reasons (a retraction can have several):
Cognition Technology & Work has 1 retracted paper in the Retraction Watch database, the latest in Apr 2010. A retraction count is not a verdict on a journal: large journals publish more and journals that investigate actively retract more. The trend and the reasons tell you more than the number.
Who funds research published in Cognition Technology & Work
Funders named most often
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to Cognition Technology & Work? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
04Indexing
Indexing of Cognition Technology & Work
- ISSN
- 1435-5558
- eISSN
- 1435-5566
- Publisher
- Springer London all its journals →
- Country
- England
- Language
- English
- Scopus source type
- Journal
- Web of Science categories
- Engineering, Industrial, Ergonomics
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
Each link opens the official record for this journal, searched by its ISSN where we have one.
05How to submit
How to submit to Cognition Technology & Work
- Read the guide for authors. It sets the article types, word limit, reference style and file format that Cognition Technology & Work accepts. Open the official guide for authors and submit from the same page.
- Use the journal's template. Springer London offers Word and LaTeX templates for many of its journals. If your manuscript is in Word and the journal wants LaTeX, our LaTeX Template Conversion moves it into the template.
- Check the fit. Read the aims and scope and a few recent issues; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Check the fee. Cognition Technology & Work is not a fully open access journal, so authors usually pay nothing unless they choose open access for their article or the journal charges page or colour fees. The guide for authors states the current charges.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
06Reviewer comments
Reviewer comments and rejection reasons for Cognition Technology & Work
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to Cognition Technology & Work, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
07Same subject
Engineering, Industrial journals with a similar impact factor*
The journals next to Cognition Technology & Work when the 70 journals of Engineering, Industrial in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 28 | Flexible Services and Manufacturing Journal | 3.51 | SCIE | Subscription |
| 29 | Research in Engineering Design | 3.41 | SCIE | Subscription |
| 30 | Human Factors The Journal of the Human Factors and Ergonomics Society | 3.35 | SCIE, SSCI | Subscription |
| 31 | IET Collaborative Intelligent Manufacturing | 3.29 | ESCI | Fully open access |
| 33 | IISE Transactions | 2.99 | SCIE | Subscription |
| 34 | Ergonomics | 2.98 | SCIE, SSCI | Subscription |
| 35 | Engineering Management Journal | 2.92 | SCIE, SSCI | Subscription |
| 36 | Advances in Industrial and Manufacturing Engineering | 2.86 | ESCI | Fully open access |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
08Journal Finder
Find the right journal for your paper
Is Cognition Technology & Work right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,503 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
09Questions
Frequently asked questions
How long is the review time of Cognition Technology & Work?
Based on 117 research articles Cognition Technology & Work published from Nov 2024 to Oct 2026, the median time from submission to acceptance was 156 days, and half of them were accepted between 97 and 280 days. After acceptance, papers appeared online after a median of 21 days. Source: received and accepted dates deposited by the publisher in Crossref, retrieved October 2026. Individual papers can take longer, especially with major revisions.
What is the impact factor of Cognition Technology & Work?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of Cognition Technology & Work is 2.99: papers it published in the two previous years were cited 2.99 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of Cognition Technology & Work?
The h-index of Cognition Technology & Work is 72 (OpenAlex, October 2026): 72 of its papers have each been cited at least 72 times. Its i10-index is 638.
What is the APC of Cognition Technology & Work?
OpenAlex lists an article processing charge (APC) of about US$3,390 for Cognition Technology & Work (data from October 2026). APCs change and can differ by article type, country or discounts, so confirm the current charge on the journal’s website before submitting.
What is the quartile of Cognition Technology & Work?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Cognition Technology & Work is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is Cognition Technology & Work indexed in Scopus?
Yes. Cognition Technology & Work appears in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Cognition Technology & Work an SCIE journal?
Yes. Cognition Technology & Work is listed in the Science Citation Index Expanded (SCIE), according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Cognition Technology & Work in Journal Citation Reports (JCR)?
Yes. Cognition Technology & Work is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
Does Cognition Technology & Work offer an APC waiver?
Cognition Technology & Work follows the policy of Springer Nature: 100% waiver for low-income countries and 50% for lower-middle income countries (World Bank list with a GDP limit), on request at submission. Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver. Rules verified 27 October 2026; confirm on the publisher's page.
Has Cognition Technology & Work retracted papers?
Yes. The Retraction Watch database lists 1 retracted paper in Cognition Technology & Work, 0 of them in the last 10 years; the most common reasons are error by journal/publisher. A retraction count alone is not a verdict on a journal; look at the trend and the reasons. Data updated October 2026.
Who funds research published in Cognition Technology & Work?
67% of 123 recent research articles in Cognition Technology & Work name a funder in Crossref; the funders named most often are the National Natural Science Foundation of China, Japan Society for the Promotion of Science, Agence de l'Environnement et de la Maîtrise de l'Energie.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- Applied Physics Letters
- Archiv der Pharmazie
- Chemical Communications
- Journal of Power Sources
- Journal of Hazardous Materials
- Molecules
- Organic Letters
- Journal of Clinical Medicine
- Environmental Science and Pollution Research
- International Journal of Hydrogen Energy
- Journal of Cleaner Production
- Journal of Immunology
- Journal of Magnetism and Magnetic Materials
- Applied Surface Science
Browse all journals: indexing, impact factor and reviewer comments →