Taylor and Francis Ltd. provides LaTeX templates for many of its journals. Check this journal’s author guidelines, and we can convert your manuscript into its template.
LaTeX Template Conversion →Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of Critical Reviews in Solid State and Materials Sciences (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers Critical Reviews in Solid State and Materials Sciences published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Physics, Condensed Matterrank 6 of 85 journals
- Materials Science, Multidisciplinaryrank 51 of 489 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of Critical Reviews in Solid State and Materials Sciences
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Critical Reviews in Solid State and Materials Sciences is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
02Fee waivers
APC waivers and discounts for Critical Reviews in Solid State and Materials Sciences
Critical Reviews in Solid State and Materials Sciences follows the waiver policy of its publisher, Taylor & Francis: 100% waiver for low-income and 50% for lower-middle income countries (World Bank list with a GDP limit), on request. Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver.
Authors affiliated in 24 countries qualify for a full waiver. See the countries →
Waivers apply to fully open access journals. If Critical Reviews in Solid State and Materials Sciences is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Who funds research published in Critical Reviews in Solid State and Materials Sciences
Funders named most often
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to Critical Reviews in Solid State and Materials Sciences? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
03Indexing
Indexing of Critical Reviews in Solid State and Materials Sciences
- ISSN
- 1040-8436
- eISSN
- 1547-6561
- Publisher
- Taylor and Francis Ltd. all its journals →
- Country
- United States
- Language
- English
- Scopus source type
- Journal
- Web of Science categories
- Materials Science, Multidisciplinary, Physics, Condensed Matter
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
Each link opens the official record for this journal, searched by its ISSN where we have one.
04How to submit
How to submit to Critical Reviews in Solid State and Materials Sciences
- Read the guide for authors. It sets the article types, word limit, reference style and file format that Critical Reviews in Solid State and Materials Sciences accepts. Open the official guide for authors and submit from the same page.
- Use the journal's template. Taylor and Francis Ltd. offers Word and LaTeX templates for many of its journals. If your manuscript is in Word and the journal wants LaTeX, our LaTeX Template Conversion moves it into the template.
- Check the fit. Compare your title and abstract with the papers it has published; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Check the fee. Critical Reviews in Solid State and Materials Sciences is not a fully open access journal, so authors usually pay nothing unless they choose open access for their article or the journal charges page or colour fees. The guide for authors states the current charges.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
05What it publishes
What Critical Reviews in Solid State and Materials Sciences publishes: real papers
06Published papers
Papers published in Critical Reviews in Solid State and Materials Sciences
Papers from the publication records ScholarsColab tracks, with their year and citations. Author names are not shown.
07Reviewer comments
Reviewer comments and rejection reasons for Critical Reviews in Solid State and Materials Sciences
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to Critical Reviews in Solid State and Materials Sciences, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
08Similar journals
Journals similar to Critical Reviews in Solid State and Materials Sciences
Journals that publish the closest work to the papers above, from the indexing lists:
- Journal of Materials Science: Materials in ElectronicsSCIEScopusJCR 20244 similar papers
- Nano ResearchSCIEScopusJCR 20245 similar papers
- Problems of Atomic Science and TechnologyESCIScopusJCR 20242 similar papers
- Frontiers in MaterialsSCIEScopusJCR 20247 similar papers
- Frontiers in ChemistrySCIEScopusJCR 20245 similar papers
- Microsystem TechnologiesScopus1 similar paper
09Same subject
Physics, Condensed Matter journals with a similar impact factor*
The journals next to Critical Reviews in Solid State and Materials Sciences when the 80 journals of Physics, Condensed Matter in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 2 | Advanced Materials | 23.5 | SCIE | Subscription |
| 3 | Advanced Energy Materials | 19.8 | SCIE | Subscription |
| 4 | Advanced Functional Materials | 15.7 | SCIE | Subscription |
| 5 | Current Opinion in Solid State and Materials Science | 14.1 | SCIE | Subscription |
| 7 | Nano Letters | 9.30 | SCIE | Subscription |
| 8 | Small | 9.13 | SCIE | Subscription |
| 9 | Annual Review of Condensed Matter Physics | 8.92 | SCIE | Subscription |
| 10 | npj Quantum Information | 7.45 | SCIE | Fully open access |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
10Journal Finder
Find the right journal for your paper
Is Critical Reviews in Solid State and Materials Sciences right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,503 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
11Questions
Frequently asked questions
What is the impact factor of Critical Reviews in Solid State and Materials Sciences?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of Critical Reviews in Solid State and Materials Sciences is 10.2: papers it published in the two previous years were cited 10.2 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of Critical Reviews in Solid State and Materials Sciences?
The h-index of Critical Reviews in Solid State and Materials Sciences is 109 (OpenAlex, October 2026): 109 of its papers have each been cited at least 109 times. Its i10-index is 438.
What is the quartile of Critical Reviews in Solid State and Materials Sciences?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Critical Reviews in Solid State and Materials Sciences is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is Critical Reviews in Solid State and Materials Sciences indexed in Scopus?
Yes. Critical Reviews in Solid State and Materials Sciences appears in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Critical Reviews in Solid State and Materials Sciences an SCIE journal?
Yes. Critical Reviews in Solid State and Materials Sciences is listed in the Science Citation Index Expanded (SCIE), according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Critical Reviews in Solid State and Materials Sciences in Journal Citation Reports (JCR)?
Yes. Critical Reviews in Solid State and Materials Sciences is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
How many papers published in Critical Reviews in Solid State and Materials Sciences does ScholarsColab track?
We track 1 paper published in Critical Reviews in Solid State and Materials Sciences in 2016, cited 21 times in total, with a median of 21 citations per paper.
Does Critical Reviews in Solid State and Materials Sciences offer an APC waiver?
Critical Reviews in Solid State and Materials Sciences follows the policy of Taylor & Francis: 100% waiver for low-income and 50% for lower-middle income countries (World Bank list with a GDP limit), on request. Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver. Rules verified 27 October 2026; confirm on the publisher's page.
Who funds research published in Critical Reviews in Solid State and Materials Sciences?
60% of 52 recent research articles in Critical Reviews in Solid State and Materials Sciences name a funder in Crossref; the funders named most often are National Natural Science Foundation of China, Natural Science Foundation of Gansu Province, Research Cultivation Program of Lanzhou University of Technology.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- Journal of Immunology
- Organic Letters
- ACS Applied Materials and Interfaces
- Journal of Clinical Medicine
- Journal of Hazardous Materials
- Fuel
- Journal of Power Sources
- Chemical Communications
- Sensors
- Archiv der Pharmazie
- Applied Physics Letters
- Applied Sciences
- British Journal of Surgery
- Energy
Browse all journals: indexing, impact factor and reviewer comments →