Elsevier B.V. provides LaTeX templates for many of its journals. Check this journal’s author guidelines, and we can convert your manuscript into its template.
LaTeX Template Conversion →Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of Fuel Processing Technology (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers Fuel Processing Technology published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Chemistry, Appliedrank 14 of 78 journals
- Engineering, Chemicalrank 34 of 182 journals
- Energy & Fuelsrank 62 of 191 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of Fuel Processing Technology
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Fuel Processing Technology is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
Open access (listed in DOAJ); article processing charge listed at about US$3,180.
02Fee waivers
APC waivers and discounts for Fuel Processing Technology
Fuel Processing Technology follows the waiver policy of its publisher, Elsevier: automatic 100% waiver for Research4Life Group A and 50% for Group B in fully open access journals, but only when every author is in an eligible country.
Authors affiliated in 82 countries qualify for a full waiver. See the countries →
Waivers apply to fully open access journals. If Fuel Processing Technology is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Retractions and research integrity at Fuel Processing Technology
Most common reasons (a retraction can have several):
Fuel Processing Technology has 1 retracted paper in the Retraction Watch database, the latest in Apr 2014. A retraction count is not a verdict on a journal: large journals publish more and journals that investigate actively retract more. The trend and the reasons tell you more than the number.
Who funds research published in Fuel Processing Technology
Funders named most often
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to Fuel Processing Technology? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
03Indexing
Indexing of Fuel Processing Technology
- ISSN
- 0378-3820
- eISSN
- 1873-7188
- Publisher
- Elsevier B.V. all its journals →
- Country
- Netherlands
- Language
- English
- Scopus source type
- Journal
- Web of Science categories
- Chemistry, Applied, Energy & Fuels, Engineering, Chemical
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
- Web of Science Master Journal List
- SCImago Journal Rank
- ISSN Portal (ISSN 0378-3820)
- DOAJ (Directory of Open Access Journals)
Each link opens the official record for this journal, searched by its ISSN where we have one.
04How to submit
How to submit to Fuel Processing Technology
- Read the guide for authors. It sets the article types, word limit, reference style and file format that Fuel Processing Technology accepts. Open the official guide for authors and submit from the same page.
- Use the journal's template. Elsevier B.V. offers Word and LaTeX templates for many of its journals. If your manuscript is in Word and the journal wants LaTeX, our LaTeX Template Conversion moves it into the template.
- Check the fit. Compare your title and abstract with the papers it has published; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Plan the fee. Fuel Processing Technology is fully open access, with an article fee of about US$3,180 after acceptance. See whether your author team qualifies for a waiver with the free APC waiver checker.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
05What it publishes
What Fuel Processing Technology publishes: real papers
06Published papers
Papers published in Fuel Processing Technology
Papers from the publication records ScholarsColab tracks, with their year and citations. Author names are not shown.
- Leaching behavior of selected trace elements in coal fly ash samples from Yenikoy coal-fired power plants201294 citations
07Reviewer comments
Reviewer comments and rejection reasons for Fuel Processing Technology
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to Fuel Processing Technology, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
08Similar journals
Journals similar to Fuel Processing Technology
Journals that publish the closest work to the papers above, from the indexing lists:
- Frontiers in Earth ScienceSCIEScopusJCR 20243 similar papers
- PLoS ONESCIEScopusJCR 20245 similar papers
- PeerJSCIEScopusJCR 20242 similar papers
- World Journal of DentistryScopus1 similar paper
- Bulgarian Chemical CommunicationsScopus1 similar paper
- Journal of ElementologySCIEScopusJCR 20241 similar paper
09Same subject
Chemistry, Applied journals with a similar impact factor*
The journals next to Fuel Processing Technology when the 71 journals of Chemistry, Applied in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 10 | Journal of Rare Earths | 7.13 | SCIE | Subscription |
| 11 | Food and Agricultural Immunology | 6.80 | SCIE | Fully open access |
| 12 | Journal of Agricultural and Food Chemistry | 6.71 | SCIE | Subscription |
| 13 | Food Chemistry X | 6.39 | SCIE | Fully open access |
| 15 | Progress in Organic Coatings | 5.96 | SCIE | Subscription |
| 16 | Catalysis Today | 5.84 | SCIE | Subscription |
| 17 | Journal of Food Composition and Analysis | 5.67 | SCIE | Subscription |
| 18 | Carbohydrate Polymer Technologies and Applications | 5.51 | ESCI | Fully open access |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
10Journal Finder
Find the right journal for your paper
Is Fuel Processing Technology right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,503 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
11Questions
Frequently asked questions
What is the impact factor of Fuel Processing Technology?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of Fuel Processing Technology is 6.34: papers it published in the two previous years were cited 6.34 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of Fuel Processing Technology?
The h-index of Fuel Processing Technology is 205 (OpenAlex, October 2026): 205 of its papers have each been cited at least 205 times. Its i10-index is 6,554.
What is the APC of Fuel Processing Technology?
OpenAlex lists an article processing charge (APC) of about US$3,180 for Fuel Processing Technology, an open access journal (data from October 2026). APCs change and can differ by article type, country or discounts, so confirm the current charge on the journal’s website before submitting.
What is the quartile of Fuel Processing Technology?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Fuel Processing Technology is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is Fuel Processing Technology indexed in Scopus?
Yes. Fuel Processing Technology appears in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Fuel Processing Technology an SCIE journal?
Yes. Fuel Processing Technology is listed in the Science Citation Index Expanded (SCIE), according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Fuel Processing Technology in Journal Citation Reports (JCR)?
Yes. Fuel Processing Technology is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
How many papers published in Fuel Processing Technology does ScholarsColab track?
We track 1 paper published in Fuel Processing Technology in 2012, cited 94 times in total, with a median of 94 citations per paper.
Does Fuel Processing Technology offer an APC waiver?
Fuel Processing Technology follows the policy of Elsevier: automatic 100% waiver for Research4Life Group A and 50% for Group B in fully open access journals, but only when every author is in an eligible country. Rules verified 27 October 2026; confirm on the publisher's page.
Has Fuel Processing Technology retracted papers?
Yes. The Retraction Watch database lists 1 retracted paper in Fuel Processing Technology, 0 of them in the last 10 years; the most common reasons are duplication of/in article, error in text, unreliable data. A retraction count alone is not a verdict on a journal; look at the trend and the reasons. Data updated October 2026.
Who funds research published in Fuel Processing Technology?
74% of 200 recent research articles in Fuel Processing Technology name a funder in Crossref; the funders named most often are National Natural Science Foundation of China, European Commission, National Key Research and Development Program of China.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- Materials
- Analyst
- Transplantation
- European journal of cancer
- Investigative Ophthalmology and Visual Science
- Construction and Building Materials
- Journal of Physical Chemistry A
- Food Chemistry
- Chemical Physics Letters
- Materials Science and Engineering: A
- Medical Physics
- Tetrahedron
- Journal of Bacteriology
- Alzheimer's and Dementia
Browse all journals: indexing, impact factor and reviewer comments →