Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of Materiali in Tehnologije (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers Materiali in Tehnologije published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Metallurgy & Metallurgical Engineeringrank 82 of 101 journals
- Materials Science, Multidisciplinaryrank 428 of 489 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of Materiali in Tehnologije
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Materiali in Tehnologije is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
Open access (listed in DOAJ); article processing charge listed at about US$323.
02Fee waivers
APC waivers and discounts for Materiali in Tehnologije
We have not found a published waiver policy for this journal's publisher (Inst Za Kovinske Materiale I In Tehnologie). Ask the editorial office before you submit, and compare publishers that do waive the APC in the APC waiver checker.
Waivers apply to fully open access journals. If Materiali in Tehnologije is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Who funds research published in Materiali in Tehnologije
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to Materiali in Tehnologije? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
03Indexing
Indexing of Materiali in Tehnologije
- ISSN
- 1580-2949
- eISSN
- 1580-3414
- Publisher
- Inst Za Kovinske Materiale I In Tehnologie
- Country
- Slovenia
- Language
- Slovenian
- Scopus source type
- Journal
- Web of Science categories
- Materials Science, Multidisciplinary, Metallurgy & Metallurgical Engineering
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
- Web of Science Master Journal List
- SCImago Journal Rank
- ISSN Portal (ISSN 1580-2949)
- DOAJ (Directory of Open Access Journals)
Each link opens the official record for this journal, searched by its ISSN where we have one.
04How to submit
How to submit to Materiali in Tehnologije
- Read the guide for authors. It sets the article types, word limit, reference style and file format that Materiali in Tehnologije accepts. You find it on the official website of the journal, usually under "For authors" or "Submit".
- Format to the journal's style. Check whether it wants a Word file, a LaTeX file or a PDF for the first submission, and follow its reference style; many journals accept any clear format at first and ask for their style only after acceptance.
- Check the fit. Compare your title and abstract with the papers it has published; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Plan the fee. Materiali in Tehnologije is fully open access, with an article fee of about US$323 after acceptance. See whether your author team qualifies for a waiver with the free APC waiver checker.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
05What it publishes
What Materiali in Tehnologije publishes: real papers
06Published papers
Papers published in Materiali in Tehnologije
Papers from the publication records ScholarsColab tracks, with their year and citations. Author names are not shown.
07Reviewer comments
Reviewer comments and rejection reasons for Materiali in Tehnologije
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to Materiali in Tehnologije, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
08Similar journals
Journals similar to Materiali in Tehnologije
Journals that publish the closest work to the papers above, from the indexing lists:
- Journal of Energy StorageSCIEScopusJCR 20243 similar papers
- Frontiers in Energy ResearchSCIEScopusJCR 20248 similar papers
- Journal of Advanced Research in Fluid Mechanics and Thermal SciencesScopus3 similar papers
- Energy Sources, Part A: Recovery, Utilization and Environmental EffectsSCIEScopusJCR 20242 similar papers
- EnergiesSCIEScopusJCR 20243 similar papers
- PLoS ONESCIEScopusJCR 202410 similar papers
09Same subject
Metallurgy & Metallurgical Engineering journals with a similar impact factor*
The journals next to Materiali in Tehnologije when the 94 journals of Metallurgy & Metallurgical Engineering in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 78 | Metallurgist | 0.89 | SCIE | Subscription |
| 79 | Archives of Metallurgy and Materials | 0.87 | SCIE | Fully open access |
| 80 | Protection of Metals and Physical Chemistry of Surfaces | 0.79 | SCIE | Subscription |
| 81 | Russian Journal of Non-Ferrous Metals | 0.63 | SCIE | Subscription |
| 83 | Metal Working and Material Science | 0.54 | ESCI | Subscription |
| 84 | CIM Journal | 0.54 | ESCI | Subscription |
| 85 | TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 0.51 | SCIE | Fully open access |
| 86 | Archives of Foundry Engineering | 0.50 | ESCI | Fully open access |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
10Journal Finder
Find the right journal for your paper
Is Materiali in Tehnologije right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,503 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
11Questions
Frequently asked questions
What is the impact factor of Materiali in Tehnologije?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of Materiali in Tehnologije is 0.59: papers it published in the two previous years were cited 0.59 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of Materiali in Tehnologije?
The h-index of Materiali in Tehnologije is 27 (OpenAlex, October 2026): 27 of its papers have each been cited at least 27 times. Its i10-index is 164.
What is the APC of Materiali in Tehnologije?
OpenAlex lists an article processing charge (APC) of about US$323 for Materiali in Tehnologije, an open access journal (data from October 2026). APCs change and can differ by article type, country or discounts, so confirm the current charge on the journal’s website before submitting.
What is the quartile of Materiali in Tehnologije?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Materiali in Tehnologije is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is Materiali in Tehnologije indexed in Scopus?
Yes. Materiali in Tehnologije appears in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Materiali in Tehnologije an SCIE journal?
Yes. Materiali in Tehnologije is listed in the Science Citation Index Expanded (SCIE), according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Materiali in Tehnologije in Journal Citation Reports (JCR)?
Yes. Materiali in Tehnologije is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
How many papers published in Materiali in Tehnologije does ScholarsColab track?
We track 1 paper published in Materiali in Tehnologije in 2012, cited 0 times in total, with a median of 0 citations per paper.
Who funds research published in Materiali in Tehnologije?
0% of 200 recent research articles in Materiali in Tehnologije name a funder in Crossref.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- International Journal of Biological Macromolecules
- Journal of Molecular Structure
- Journal of Animal Science
- Physics Letters A
- Applied Optics
- Journal of Alloys and Compounds
- Medicine
- Zootaxa
- IEEE Transactions on Magnetics
- Chemical Engineering Journal
- Chemosphere
- Journal of Physical Chemistry
- Journal of Dairy Science
- Astrophysical Journal
Browse all journals: indexing, impact factor and reviewer comments →