Journals listed in Web of Science and JCR receive many submissions and desk reject a large share. A section-by-section audit by a PhD reviewer in your area shows what to fix first.
Manuscript Auditing →01Impact factor
Impact factor of Anti-Corrosion Methods and Materials (2026)
The impact factor shown here is the 2-year mean citedness: citations received in a year by the papers Anti-Corrosion Methods and Materials published in the two previous years, divided by the number of those papers. That is the same formula as the Journal Impact Factor, applied to the open citation data of OpenAlex. The journal is listed in JCR 2024, so it also has an official Journal Impact Factor published by Clarivate, which can differ because it counts citations from Web of Science journals only.
Rank in its subject categories
- Metallurgy & Metallurgical Engineeringrank 34 of 101 journals
Ranks here compare journals of the same Web of Science category in our data by 2-year citedness; they are not the official JCR rank.
Quartile of Anti-Corrosion Methods and Materials
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Anti-Corrosion Methods and Materials is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Citations and papers per year
02Fee waivers
APC waivers and discounts for Anti-Corrosion Methods and Materials
Anti-Corrosion Methods and Materials follows the waiver policy of its publisher, Emerald Publishing: automatic 100% waiver for low-income and 50% for lower-middle income countries (World Bank FY2023 list). Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver.
Authors affiliated in 26 countries qualify for a full waiver. See the countries →
Waivers apply to fully open access journals. If Anti-Corrosion Methods and Materials is a hybrid journal, you can publish without any fee through the subscription route.
Checking the waiver rules for your country…
Retractions and research integrity at Anti-Corrosion Methods and Materials
Retractions per year
Most common reasons (a retraction can have several):
Anti-Corrosion Methods and Materials has 3 retracted papers in the Retraction Watch database, the latest in Jun 2025. A retraction count is not a verdict on a journal: large journals publish more and journals that investigate actively retract more. The trend and the reasons tell you more than the number.
Who funds research published in Anti-Corrosion Methods and Materials
Funders named most often
A high share of funded papers usually means the journal is a common choice for grant-supported work in its field. If your funder pays article processing charges, or your country qualifies for a waiver, check what applies to your author team with the free APC waiver checker.
Submitting to Anti-Corrosion Methods and Materials? See your rejection risk first.
Seven questions our reviewers ask in every audit, plus your abstract and the fit with this journal. Free, no sign-up, about 2 minutes.
03Indexing
Indexing of Anti-Corrosion Methods and Materials
- ISSN
- 0003-5599
- eISSN
- 1758-4221
- Publisher
- Emerald Publishing Limited all its journals →
- Subjects
- Metallurgy & Metallurgical Engineering
From the indexing lists used on ScholarsColab, updated 1 March 2026. Indexing can change: confirm on the Web of Science Master Journal List or the Scopus source list before submitting. Official Journal Impact Factors and JCR quartiles are published by Clarivate; the impact factor and quartile on this page are calculated from OpenAlex open data (see how the impact factor works).
Each link opens the official record for this journal, searched by its ISSN where we have one.
04How to submit
How to submit to Anti-Corrosion Methods and Materials
- Read the guide for authors. It sets the article types, word limit, reference style and file format that Anti-Corrosion Methods and Materials accepts. You find it on the official website of the journal, usually under "For authors" or "Submit".
- Format to the journal's style. Check whether it wants a Word file, a LaTeX file or a PDF for the first submission, and follow its reference style; many journals accept any clear format at first and ask for their style only after acceptance.
- Check the fit. Read the aims and scope and a few recent issues; papers outside the scope are the most common reason for a desk rejection. The Journal Finder shows journals that published the closest work.
- Check the fee. Anti-Corrosion Methods and Materials is not a fully open access journal, so authors usually pay nothing unless they choose open access for their article or the journal charges page or colour fees. The guide for authors states the current charges.
- Check your manuscript before you submit. The free Submission Readiness Check asks the seven questions our reviewers ask in every audit and takes about 2 minutes.
05Reviewer comments
Reviewer comments and rejection reasons for Anti-Corrosion Methods and Materials
No reviewer or editor comments have been shared for this journal yet. Did you submit here? Help other researchers by sharing the comments you received, anonymously.
Share reviewer comments for this journal →Across the reviewer comments researchers have shared with us, the points raised most often are figures, tables and equations (21%), literature and references (12%) and novelty and contribution (10%). Before you submit to Anti-Corrosion Methods and Materials, a Manuscript Audit by a PhD reviewer in your area checks your paper against exactly these points.
Audit my paper before I submit →Not sure yet? Check if your paper is ready for this journal: free, no AI, under 5 secondsPreparing to submit here? Make sure reviewers don't stop at the issues they raise most often. A PhD reviewer in your area can audit your manuscript section by section, and we can convert it into the journal's LaTeX template.
06Same subject
Metallurgy & Metallurgical Engineering journals with a similar impact factor*
The journals next to Anti-Corrosion Methods and Materials when the 94 journals of Metallurgy & Metallurgical Engineering in our data are ranked by impact factor*:
| Rank | Journal | Impact factor* | Indexing | Open access |
|---|---|---|---|---|
| 30 | China Foundry | 3.19 | SCIE | Fully open access |
| 31 | Metallurgical and Materials Transactions A | 3.18 | SCIE | Subscription |
| 32 | Welding in the World | 3.17 | SCIE | Subscription |
| 33 | Journal of Sustainable Metallurgy | 3.14 | SCIE | Subscription |
| 35 | Soldering and Surface Mount Technology | 2.87 | SCIE | Subscription |
| 36 | High Temperature Corrosion of Materials | 2.76 | SCIE | Subscription |
| 37 | Science and Technology of Welding & Joining | 2.46 | SCIE | Subscription |
| 38 | International Journal of Metalcasting | 2.39 | SCIE | Subscription |
*Impact factor calculated from OpenAlex open data (2-year citedness), not the official Clarivate value.
07Journal Finder
Find the right journal for your paper
Is Anti-Corrosion Methods and Materials right for your paper? Compare journals
Paste your title, keywords or abstract. See the journals that published the closest papers, with indexing, impact factor, review time and APC.
No AI or language model is used. Your words are matched against the titles of 156,503 real published journal papers, by our mentors and by other researchers (shown without names); journals are ranked by how many closely matching papers they published. Indexing comes from the SCIE, SSCI, AHCI, ESCI, Scopus and JCR 2024 lists, matched by journal name; the impact factor is calculated from OpenAlex open data, not the official Clarivate value, and no quartile is shown until the official JCR or SJR quartile can be; review time comes from the dates publishers deposit in Crossref (not every publisher deposits them). Always check a journal’s scope and current indexing before submitting.
08Questions
Frequently asked questions
What is the impact factor of Anti-Corrosion Methods and Materials?
Based on OpenAlex citation data (October 2026), the 2-year impact factor of Anti-Corrosion Methods and Materials is 2.95: papers it published in the two previous years were cited 2.95 times on average in a year. The journal is listed in JCR 2024, so Clarivate also publishes an official Journal Impact Factor, which can differ.
What is the h-index of Anti-Corrosion Methods and Materials?
The h-index of Anti-Corrosion Methods and Materials is 44 (OpenAlex, October 2026): 44 of its papers have each been cited at least 44 times. Its i10-index is 625.
What is the quartile of Anti-Corrosion Methods and Materials?
A journal's quartile (Q1 to Q4) is its position within a subject category: Q1 is the top quarter. The official quartiles are published by Clarivate in Journal Citation Reports (by Journal Impact Factor, in Web of Science categories) and by Scimago as the SJR quartile (in Scopus categories). Anti-Corrosion Methods and Materials is listed in JCR 2024, so its JCR quartile is in Journal Citation Reports. It is indexed in Scopus, so Scimago shows its SJR quartile. ScholarsColab does not show a quartile until it can show the official one; the impact factor and rank above are calculated from open data.
Is Anti-Corrosion Methods and Materials indexed in Scopus?
Yes. Anti-Corrosion Methods and Materials appears in the Scopus list, according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Anti-Corrosion Methods and Materials an SCIE journal?
Yes. Anti-Corrosion Methods and Materials is listed in the Science Citation Index Expanded (SCIE), according to the indexing lists used on ScholarsColab (updated 1 March 2026). Always confirm the current status on the official list before submitting.
Is Anti-Corrosion Methods and Materials in Journal Citation Reports (JCR)?
Yes. Anti-Corrosion Methods and Materials is listed in JCR 2024, so it has a Journal Impact Factor. For the current impact factor and quartile, check Journal Citation Reports.
Does Anti-Corrosion Methods and Materials offer an APC waiver?
Anti-Corrosion Methods and Materials follows the policy of Emerald Publishing: automatic 100% waiver for low-income and 50% for lower-middle income countries (World Bank FY2023 list). Only the corresponding author's affiliation counts. Co-authors from other countries do not change the waiver. Rules verified 27 October 2026; confirm on the publisher's page.
Has Anti-Corrosion Methods and Materials retracted papers?
Yes. The Retraction Watch database lists 3 retracted papers in Anti-Corrosion Methods and Materials, 3 of them in the last 10 years; the most common reasons are unreliable results and/or conclusions, concerns/issues about image. A retraction count alone is not a verdict on a journal; look at the trend and the reasons. Data updated October 2026.
Who funds research published in Anti-Corrosion Methods and Materials?
53% of 200 recent research articles in Anti-Corrosion Methods and Materials name a funder in Crossref; the funders named most often are National Natural Science Foundation of China, National Key R&D Program of China, China Postdoctoral Science Foundation.
Want a PhD expert to choose the journal with you?
Our Journal Selection & Submission service shortlists up to 5 journals that match your manuscript, indexing requirement and target quartile, and handles the submission. If your paper was rejected before, a Manuscript Audit shows what to fix first.
Not sure yet? Check your manuscript for this journal, free · How the process works
Popular journals
- The Lancet
- Nature
- Science
- PLoS ONE
- Scientific Reports
- Journal of the American Chemical Society
- Chemical Communications
- Archiv der Pharmazie
- Energy
- Applied Physics Letters
- Journal of Hazardous Materials
- Journal of Power Sources
- Astronomy and Astrophysics
- Organic Letters
- Journal of Clinical Medicine
- Journal of Immunology
- Value in Health
- International Journal of Molecular Sciences
- Ceramics International
- Polymer
Browse all journals: indexing, impact factor and reviewer comments →